Usable vs. Rentable Square Feet: Why You Pay for Space You Can’t Use
3 min read56 views

The listing says 2,500 square feet. You walk in, and it feels smaller.
You’re probably right. In many commercial buildings, especially office, the square footage you pay for includes space you’ll never use: your share of the lobby, the hallways, the restrooms down the hall.
That’s the gap between usable and rentable square feet. It’s normal. It’s also negotiable, and it changes what a space really costs.
The Short Answer
- Usable square feet (USF): the space inside your suite that you actually occupy.
- Rentable square feet (RSF): your usable space plus a share of the building’s common areas.
- Load factor: the percentage added to usable space to get rentable.
Rent is usually charged on rentable square feet. So the bigger the load factor, the more you pay for space that isn’t yours alone.
What’s the Difference Between Usable and Rentable?
Usable is the floor inside your walls. Your offices, your treatment rooms, your storage.
Rentable adds a slice of the shared areas that serve every tenant:
- Lobbies and elevator areas
- Common hallways
- Shared restrooms
- Mechanical and electrical rooms
The ANSI blog describes rentable area as the space a tenant uses plus a share of shared spaces like lobbies, hallways, and restrooms, with that share called the load factor. In U.S. office buildings, the method for measuring both comes from BOMA, the Building Owners and Managers Association. Its current office standard is ANSI/BOMA Z65.1-2024. ansiansi
What Is a Load Factor?
It’s the multiplier that turns usable into rentable.
Rentable SF = Usable SF × (1 + load factor)
Here’s a real example. A federal lease filed by the GSA for an office building in Washington, D.C. covers 189,008 BOMA rentable square feet, equivalent to 164,549 BOMA usable square feet. gsa
- 189,008 ÷ 164,549 = 1.149
- Load factor: about 15%
For every 100 square feet the tenant occupies, it pays for about 115.
The same gap shows up under different names. Architecture firm Gensler notes it can be called load factor, R/U factor, factor, gross up, or market factor. If a landlord uses a term you don’t recognize, ask what it means in square feet. gensler
How Much Does the Load Factor Cost You?
More than the rent per square foot suggests.
Illustrative math. Our physical therapy practice needs about 2,230 usable sq ft. It’s comparing two office suites:
Space A:
- Load factor: 12%
- Rentable: 2,230 × 1.12 = 2,500 sq ft
- Rent: $35 per RSF, all-in
- Annual cost: $87,500
Space B:
- Load factor: 20%
- Rentable: 2,230 × 1.20 = 2,676 sq ft
- Rent: $33 per RSF, all-in
- Annual cost: $88,308
Space B’s rate is $2 lower. It still costs about $800 more a year, for the exact same usable space.
The fix is simple: compare cost per usable square foot.
- Space A: $87,500 ÷ 2,230 = $39.24 per USF
- Space B: $88,308 ÷ 2,230 = $39.60 per USF
Does This Apply to Every Property Type?
Mostly office, and multi-tenant buildings in general.
- Office: load factors are standard, especially in buildings with big lobbies and shared floors.
- Retail: many shopping center spaces are measured to the outside of the walls, with little or no load factor. Shared costs show up in CAM instead.
- Industrial: a single-tenant warehouse usually has no load factor at all. Multi-tenant flex buildings sometimes do.
BOMA publishes separate measurement standards for office, retail, and industrial buildings. Ask which one the landlord used.
How Do You Protect Yourself?
Five questions for every space:
- What are the usable and rentable square feet? Get both numbers in writing.
- What’s the load factor? And how does it compare to other buildings you’re touring?
- Which BOMA standard and method was used? Different versions can produce different numbers.
- Can you remeasure? Some tenants pay for their own measurement before signing.
- Will the rentable square footage stay fixed? Ask that it not increase during the lease if the landlord remeasures the building.
And always run the cost-per-usable-square-foot math before you compare two listings.
Recap

- Usable is the space you occupy. Rentable includes shared areas.
- Rent is usually charged on rentable square feet.
- Load factor = rentable ÷ usable, minus 1.
- A lower rate can still cost more if the load factor is higher.
- Compare spaces on cost per usable square foot.
Final Word
You’ll almost always pay for some space you can’t use. That’s how multi-tenant buildings work.
What you can control is how much. Get both numbers, know the load factor, and compare spaces on what you actually occupy, not what’s on the listing.
Browse commercial space for lease at hutfin.com.